Professional garages that respect the environment and their workers have equipped themselves with a system for the extraction of exhaust gases emitted by motorcycles, scooters or 2-wheeled vehicles when they are started inside the garage. Experience teaches us that every mechanic has worked hard to adapt a standard gas extraction product, creating DIY adapters for the various mufflers.
WORKY provides a simple and professional solution with its brand new GRNP-75M product
The final letter M means that it is specific for MOTORBIKES.
GRNP-75M, the revolution in one detail
The new rubber nozzle with magnetic coupling and pedestal is WORKY's permanent solution to adapting existing systems to all the different two-wheeler exhaust pipes.
The trick is its self-supporting ground plate connected to a support bar using 4 powerful magnets.
Why did we use magnets?
We know that motorcycles or scooters are repaired both on the ground on a stand and on the lift bench. There is not enough space to rest the whole plate when the vehicle is lifted onto the bench so the support rod is detached and positioned directly on the lift using the magnets. The rubber nozzle is also connected to the bar by means of a powerful magnet so that it can be easily positioned in correspondence with the exhaust outlet.
Why should the nozzle be placed on a bar and not connected to the exhaust?
-
Because an extraction system must extract the hot exhaust and mix it with the surrounding air at room temperature in order to work well.
-
Because if the nozzle is sealed on the exhaust without any other air entering, the extraction system can shut down the engine when extracting the exhaust.
- Because if the rubber nozzle is far from the exhaust pipe it does not melt on the muffler (every biker’s prize possession!) without the risk of leaving molten rubber marks or other residues that no one would like to find as a souvenir...
Flexible, configurable, light and stable
Coupled exhausts, underbody exhausts, exhausts under the tail fairing, multiple exhausts, oversized mufflers due to a converter,… every vehicle has left the factory and, drawing from the rich aftermarket catalog, is characterized by the type of exhaust used. Your garage has everything it takes to effectively extract from any vehicle with a pair of GRNP-75M nozzles, even keeping the old system that works well but does not fit modern vehicles.
Ask WORKY and place your trust in people who are capable of creating an entirely new world all around you.