• Products
  • Company
  • Sectors
  • Services
  • Vehicle Exhaust Extraction
  • Dust Extraction
WORKY
  • Blog
  • Contacts
  • Work with us
  • English - United Kingdom
  • Italiano - Italia
  • Fluid Distribution
  • Welding Fume Extraction
WORKY
  • Fluid Distribution
  • Welding Fume Extraction
  • Vehicle Exhaust Extraction
  • Dust Extraction
  • Products
  • Company
  • Sectors
  • Services
  • Blog
  • Contacts
  • English - UK
    • Italian - Italy
    • German - Germany
    • English - US
  • Home
  • Blog WORKY Automotive

Workshop Exhaust Extraction in Winter: Why Keeping Doors Closed Protects Health and Reduces Heating Costs

05/15/2026 workshop fumes extraction system, automotive, exhaust gas extraction
3 Minutes
Workshop Exhaust Extraction in Winter | WORKY
6:20

aspirazione gas di scarico

In mechanical workshops and body shops, the arrival of winter brings a complex management challenge: removing the harmful gases generated by vehicles undergoing maintenance without losing the heat of the environments.

For decades, the most common solution has been natural ventilation, that is the practice of keeping the large industrial doors fully or partially open to circulate air. Today, economic data and strict workplace safety regulations show that this habit is not only ineffective, but represents an exorbitant cost and a serious risk to workers' health.

Keeping the workshop closed, safe, and heated is possible thanks to the exhaust gas extraction systems designed by WORKY. This choice translates into a highly healthy environment and a better Return on Investment (ROI) deriving from the drastic reduction of energy waste.

The hidden cost of natural ventilation in winter

Keeping a door open in the middle of winter triggers a detrimental physical phenomenon known as the "chimney effect": the heated air, being lighter, rises and escapes from the upper parts of the building, while the freezing outside air enters from below, right at head height.

The economic impact of this continuous thermal exchange is drastic. The workshop's heating system is forced to work continuously at maximum power to compensate for the freezing air entering.

Leaving an industrial door open even just for limited fractions of time every day causes significant heat loss. Working with the doors open means wasting heat and the energy required to produce it, resulting in a skyrocketing increase in gas bills and premature wear and tear on the boilers.

In addition to the economic damage, there is a clear worsening of comfort: the cold stiffens hands, reduces the manual precision of the mechanics, and significantly increases the risk of musculoskeletal injuries.

Open doors and health: a false myth debunked by regulations

In addition to energy waste, relying on natural ventilation generates a serious health risk.

There is a widespread misconception that outside air can adequately dilute harmful gases, but natural ventilation is completely ineffective in protecting workers. Exhaust gases contain lethal substances such as carbon monoxide, nitrogen oxides, unburned hydrocarbons, and sulfur compounds.

When gases exit the exhaust pipe, they immediately hit the mechanic's face and respiratory tract long before they can disperse into the rest of the building.

 

CTA C1 - orizzontale (gas di scarico) - EN - gennaio 2025

Exhaust gas extraction systems: the ultimate solution

To ensure a warm and compliant working environment, the installation of localized extraction systems, known as LEV (Local Exhaust Ventilation) systems, is essential.

These systems capture the gases by connecting an extraction device directly to the exhaust pipe, preventing toxic substances from contaminating the air breathed by the staff.

WORKY, with its entirely Made in Italy design and ISO 9001:2015 certified processes, offers a wide range of solutions for every need.

WORKY solutions for every configuration

To help workshops identify the most suitable technology for their spaces, WORKY offers different types of systems:

The configurations listed below are purely general indications – for a solution tailored to your needs, please contact our Sales Department.

 WORKY Solution   Installation Type   Workshop Size   Frequency of Use
Grolly Mobile (on trolley) Any  Sporadic or temporary 
Miniset  Fixed (wall-mounted)  Small  Basic / Regular
 Reels / Ducting  Fixed (ceiling-mounted)  Medium and Large  Frequent / Intensive 
 Underfloor systems   Fixed (underfloor))  Any Sporadic
aspirazione-di-fumi-in-officina-e-necessaria-ma-quale-impianto-scegliere-2_i4864-kkVhppX-l1-n1-4-3
1 Mobile Exhaust Gas Extraction System
aspirazione-di-fumi-in-officina-e-necessaria-ma-quale-impianto-scegliere-3_i4861-k1hm2bo-l1-n1-3-3
2 Sistema fisso per l'aspirazione dei gas di scarico
aspirazione-di-fumi-in-officina-e-necessaria-ma-quale-impianto-scegliere-4_i4865-k3gyUAB-l1-n1-4-3
3 Sistema scorrevole per l'aspirazione dei gas di scarico
aspirazione-di-fumi-in-officina-e-necessaria-ma-quale-impianto-scegliere-1_i4862-k24qFD-l1-n1-4-3
4 Sistema sottopavimento per l'aspirazione dei gas di scarico

 

Mobile systems like the Grolly can be suitable for temporary workshops. The Miniset range meets the needs of small workshops with a basic fixed system.

For large workshops or maintenance centers, fixed or sliding hose reels on aluminum ducting (GAT series) offer maximum flexibility, covering multiple workstations. An extraction system with underfloor traps allows work areas to remain free from potential obstacles when not in use.

Optimizing ROI: energy savings and productivity

This efficiency translates into a deep reduction in operating costs related to heating. Thanks to significant savings on utility bills and the reduction of boiler wear and tear costs, the Return on Investment (ROI) of an extraction system is generally achieved in a decidedly short timeframe.

Furthermore, a comfortable, warm environment that is purified from toxins leads to a drastic drop in sick leave and a clear increase in the daily efficiency and productivity of the team.

CTA Consulenza - orizzontale - Gennaio 2025 EN

Frequently Asked Questions

Is it enough to keep the workshop doors open to eliminate exhaust gases?

No, natural ventilation is completely ineffective. Exhaust gases hit the mechanics' respiratory tracts long before they can disperse outside, violating the strict workplace safety regulations in force.

How much do open doors affect heating costs?

Leaving doors open generates significant heat loss, which forces the heating system to work at maximum capacity, leading to a massive waste of energy with a devastating impact on utility bills.

What is the best solution for extracting fumes in a small workshop?

For those who need to use an extraction system occasionally, WORKY offers portable trolley-mounted systems called Grolly, or extremely compact fixed systems (Miniset) consisting of an extractor, hose, and nozzle.

How long does it take to amortize the cost of an exhaust gas extraction system?

By working with the industrial doors closed and optimizing heating consumption, the net energy savings usually make it possible to pay off the entire cost of the extraction system in a very short and advantageous timeframe for companies.


Vehicle Exhaust Fumes in the Workshop: Why No Smell Does Not Mean Clean Air

Previous Post

Workshop layout planning: visualise your workshop before installation

Next Post
    CTA C1 - verticale gas di scarico - EN - gennaio 2025 v2
    Blog WORKY Automotive

    Subscribe to WORKY's Automotive blog and stay updated!

    Categories

    • automotive (46)
    • exhaust gas extraction (44)
    • exhaust fumes extraction systems (19)
    • fume extraction systems (15)
    • car workshop (12)

    Popular Posts

    21 May, 2021
    Car workshop design: best practices for maximum efficiency
    24 Feb, 2026
    Portable exhaust gas extractor: the flexible solution for today’s garage
    30 Jan, 2025
    How to choose the right exhaust fumes extraction systems
    07 Apr, 2022
    Vehicle exhaust extraction systems: the benefits of modern systems
    worky

    We work alongside your business to make your work environment unique, functional and well-organised, perfectly suited to your needs. Bespoke and modern solutions that guarantee safety and functionality to maximise productivity and efficiency.

    Business Unit

    • Automotive
    • Heavy Duty
    • Bodyshop
    • Industry
    • Military
    • Agriculture

    Prodotti

    • Vehicle Exhaust Extraction
    • Dust Extraction
    • Fluid Distribution
    • Welding fume extraction
    italian factory

    Quality certified
    ISO 9001:2015

    accredia kiwa

    Via Masaccio, 15 – Z.I. Mancasale | 42124 Reggio Emilia – ITALY

    P.IVA 02492210352 | WORKY ©

    Privacy Policy / Cookie Policy / Terms and Conditions / Whistleblowing

    italian-factory

    Quality certified
    ISO 9001:2015

    accredia kiwa