Installing a welding fume extraction system goes beyond complying with regulations. It helps protect workers’ health and wellbeing, supports the long-term future of the business and creates a healthier working environment for technicians.
Welding fumes are hazardous, and capturing them at source is a highly effective control measure. Among WORKY’s solutions, SMOBIPLUS is one of the best-selling units for low-concentration fumes generated by occasional welding operations.
What is SMOBIPLUS and what are its features?
SMOBIPLUS is a mobile unit designed to extract and filter welding fumes. It offers the flexibility required in mechanical workshops and vehicle body shops.
Its metal chassis houses the filters and extraction fan. The unit has two fixed wheels and two swivel castors, one fitted with a brake for stability during use. A 3 m articulated extraction arm with a diameter of 150 mm ends in a hood designed to capture fumes effectively.
SMOBIPLUS comes in different versions, including three-phase motor configurations, a 230 V single-phase option and versions suited to the electrical specifications of the installation country or workplace.

The four-stage welding fume filtration system
At the heart of SMOBIPLUS is its air filtration system. Once the articulated arm hood is positioned above the welding point, the 1.5 hp fan installed in the lower section draws fumes through the arm into four successive filters.
The standard filtration stages are:
-
Metal mesh spark arrestor filter
-
Synthetic pre-filter
-
High-efficiency filter
-
Final activated carbon filter for deodorising the air
An alternative configuration replaces the synthetic pre-filter and high-efficiency filter with a cartridge filter.
Once filtered and deodorised, the air exits through a rear grille and returns to the workplace. When site requirements or applicable regulations call for outdoor discharge, an optional flange and flexible duct can be fitted to convey the extracted air outside the building.
Benefits for body shops and mechanical workshops
These wheeled units are easy to manoeuvre and operate. In body shops, for instance, they can serve separate work areas where small car components are welded before painting.
The integrated hour meter is another practical benefit: workshop managers can monitor operating time and plan periodic filter maintenance more effectively.
Intuitive, user-friendly equipment can streamline workflows, increase operational flexibility and help control costs while improving the working environment.
WORKY specialists are available to help you choose the most suitable welding fume extraction system for your requirements.
Frequently asked questions
Which applications is SMOBIPLUS recommended for?
SMOBIPLUS is a best-selling WORKY model for extracting low-concentration welding fumes from occasional welding tasks. It is particularly suitable for mechanical workshops and body shops needing to work in different areas.
What does the unit’s filtration system include?
The standard system has four stages: a spark arrestor filter, a synthetic pre-filter, a high-efficiency filter and a final activated carbon filter. A variant uses a cartridge filter in place of the synthetic and high-efficiency filters.
Does the extracted air discharge outdoors?
In its standard configuration, the filtered and deodorised air returns to the working environment. An optional flange and flexible duct allow outdoor discharge where required and permitted by applicable rules.
How can I tell when to change the filters?
An integrated hour meter shows operating time and helps schedule periodic filter maintenance. Actual replacement intervals depend on the manufacturer’s instructions and operating conditions.